Physical and chemical indicators
| Components | single set |
| Appearance | Milky white liquid |
| Solid content | 60%±2 |
| PH value | 7～8 |
| Ionic type | weak cation |
Application process
The best option for pre-spinning spinning effect: It is recommended to add 0.2%-0.6% polyester staple fiber unified oil agent.
Post-spinning: Add water to the recommended proportion of HC-8166 and stir to mix evenly. The dilution ratio can be adjusted according to the desired effect of the fiber. It is applicable to both spraying process and dipping process.
Precautions
1) Water quality requirements: conductivity below 0.98us/cm, hardness below 3.1mg/L (as CaCO3), pH between 7.0-8.0.
2) This silicone oil is used for fiber production. Before using this silicone oil for other purposes, please test the suitability and use it carefully.
3) All chemicals may have adverse effects on the environment and human body. Please refer to the standards for safe use of chemicals.
4) This silicone oil will freeze when the temperature is below 0℃. Before use, heat it to 20~30℃ to completely dissolve it before use. It will not affect the quality.
5) Pay attention to the oven and keep as much moisture out of the workshop as possible.
6) The shelf life of this product is 6 months. Easy to transport.
If quality problems occur, we will provide a full refund and bear all shipping costs. Send an inquiry now to get at least 10% off, please contact us via WhatsApp or Email us to discuss.
Hot Tags: hc-8166 polymer polyester staple fiber special slippery silicone oil, China hc-8166 polymer polyester staple fiber special slippery silicone oil manufacturers, factory, Hydrazine 1 2 dicarboxamide, M DIISOPROPENYL BENZENE, Diphenylsiloxane dimethylsiloxane copolymer, Tricobalt tetraoxide, Diazolidinyl Urea, 4 7 10 TRIOXA 1 13 TRIDECANEDIAMINE
