Technical indicators
| Appearance | light yellow liquid |
| Water reduction rate | 20% ~ 40% |
| PH value | 6～8 |
| Retarding time | 2 to 8 hours (can be adjusted according to user requirements) |
| Specific gravity | l.08±0.02 |
| Solid content | 20±1% |
Performance features
High early strength, early strength increased by more than 70%, 28d strength increased by more than 40%, especially suitable for high-content fly ash concrete;
Low slump loss, tested according to pumping agent standards, 1h slump loss is less than 30mm;
High durability, this product can reduce the water-cement ratio of concrete, improve durability and reduce shrinkage and creep deformation.
High water reduction rate, when the slump is about 80mm, the water reduction rate is more than 25%; when the slump is about 180mm, the water reduction rate is more than 33%.
Small dosage and low cost, usually the dosage is 0.5~1.5% of the cementitious material.
A green product, this product does not cause pollution to the natural environment during the production process and complies with the IS014000 environmental protection management standard.
Instructions
The dosage is 0.5-1.5% of the weight of the cementitious material, and the recommended dosage is 0.8-1.2%.
When using, add the TD-HPC product and water to the mixer at the same time.
Conduct a concrete trial mix test before use to determine the appropriate dosage.
Packaging and storage
TD-HPC is a liquid product, packed in 200Kg plastic barrels, or according to customer requirements.
It is suitable for indoor storage and has a shelf life of one year. After passing the test and debugging, it can still be used.
Hot Tags: td-hpc polycarboxylic acid high performance water reducing agent, China td-hpc polycarboxylic acid high performance water reducing agent manufacturers, factory, M DIISOPROPENYL BENZENE, Tricobalt tetraoxide, 1 3 Propanediol, POLY ETHYLENE CO ACRYLIC ACID , Isosorbide Dimethyl Ether, Cyclohexylbenzene
