Steel Water-based Rust Inhibitor

Introduction and application of Steel water-based rust inhibitor

Specification of Steel water-based rust inhibitor

Suitable for long-term or short-term rust prevention of steel parts.
2. Suitable for high-pressure water gun, water sandblasting and rust removal, etc. Add water-based rust inhibitor to prevent the workpiece from rusting immediately after rust removal.
3. It can also be diluted with water and used as cutting fluid.
4. It is used to prevent rust on workpieces. According to the actual situation, the workpieces are directly soaked or sprayed on the surface and then air-dried or dried naturally. When used for water blasting and rust removal, add the rust inhibitor to the water in an amount of 2-5%, and adjust the amount according to the anti-rust period.

Appearance: light yellow transparent liquid

Odor: slight odor

Soaking time: 5-10 minutes

Brushing (twice) area per kilogram: 10-15 (㎡); Soaking treatment: 50-80

It has excellent rust resistance and strong cleaning properties, and can be used to clean light oil stains.

Package of Steel water-based rust inhibitor

100G/1kg/25kg /200kgdrum

This product is valid for 24 months from the production date when stored in a warm sealed state.

Safety and Transportation

This product should be stored and sealed at room temperature. Customers should carefully read the product treatment, material safety data sheet (MSDS), and labels before use, be familiar with the product's safety information, operating instructions, and environmental impact, and wear appropriate personal protection as required. supplies.

Hot Tags: steel water-based rust inhibitor, China steel water-based rust inhibitor manufacturers, factory, Biurea, Tetramethylol acetylenediurea, 3 Bromo 2 2 bis bromomethyl propanol, Benzalkonium Chloride, 3 5 DI TERT BUTYLBENZOIC ACID, 2 4 Diphenyl 4 methyl 1 pentene