Products Description
Introduction and application of METHANOL SYNTHESIS CATALYAT l Cu Zn Al2O3 Methanol Synthesis Catalyst
Good mechanical strength
The catalyst's sponge micro pore structure can make it better tenacity so that it is of better heat-expansion & cold-shrink resistance. The 6-holed shape ensures symmetrical stress patterns and no easy fracture-line. In addition, the increase of pressure drop due to catalyst attrition or breakage will be less than 10% over guarantee period.
High activity
The reaction normally takes places at outer surface of the catalyst, therefore a uniform nickel coating has
to be insured. The catalyst features an optimized Ni-content, specially adapted to its surface roughness and
porosity. Simultaneously, domed shape allows full utilization of surface.
Specification of METHANOL SYNTHESIS CATALYAT l Cu Zn Al2O3 Methanol Synthesis Catalyst
|
Typical physical and chemical property |
|
|
Outer appearance and shape |
6-holes honeycomb Longer formΦ16×14x3.5mm |
|
Bulk density |
0.9-1.0 kg/l |
|
Chemistry composition % (m/m) |
NiO≥14.5 rare earth2-5% Si≤0.2 |
|
Inlet gas temperature |
450～600℃ |
|
Outlet gas temperature |
650～850℃ |
|
Steam/carbon ratio： |
2.2～5.0 |
Package of METHANOL SYNTHESIS CATALYAT l Cu Zn Al2O3 Methanol Synthesis Catalyst
The catalyst is packed in iron barrels lined inside with plastic bags.
It should be stored in dry and well-ventilated place.
The catalyst can usually be stored for several years without remarkable deterioration in its properties.
Hot Tags: primary steam reforming catalyst | cu zn al2o3 methanol synthesis catalyst, China primary steam reforming catalyst | cu zn al2o3 methanol synthesis catalyst manufacturers, factory, 2 4 Diphenyl 4 methyl 1 pentene, DICYCLOPENTANYL METHACRYLATE, 1 H Methylbenzotriazole Tolyltriazole, Cocamidopropyl hydroxysultaine, Cyclohexanone oxime, TPS
