It can be used to produce low-molecular ashless dispersants and prepare two-stroke oils. It can also be used in lubrication, adhesives, rubber and electrical insulation materials and other industries. It can be used to produce low-molecular ashless dispersants and can also be used as a tackifier for a variety of materials. Molecular weight 1300 is a non-volatile liquid with stable chemical properties. It will not form residues after high temperature volatilization or thermal decomposition. It has good lubrication properties, is resistant to oxidation, impermeable to water vapor and other gases, and has hydrophobicity and viscosity increasing properties. 1300 can be used to produce low molecular ashless dispersants to prepare two-stroke oil and gear oil. It can also be used in lubrication, sealing, adhesives, rubber, electrical insulation materials and other industries. It can be used in hydraulic oil, drawing oil, quenching oil and many other industries. Material tackifier. Polyisobutylene with a molecular weight of 2400 is a high-viscosity polyisobutylene. It is a non-volatile liquid with stable chemical properties. It will not form residues after volatilization or thermal decomposition at high temperatures. It is resistant to oxidation, impermeable to water vapor and other gases, and has hydrophobicity and viscosity increasing properties. 2400 can be used as tackifier, adhesive, plasticizer, release agent, electrical insulation material, drawing oil, gear oil, etc.
| Project | Quality Index | Test Methods | ||
| Exterior | Colorless or light yellow transparent liquid | Visual inspection | ||
| 100℃ kinematic viscosity cst | 210-250 | 559-665 | 4500-4900 | GB/T265 |
| Density (20℃) Kg/m 3 | Actual measurement | Actual measurement | Actual measurement | GB/T1884 |
| Flash point (opening) ℃ | ≥165 | ≥170 | ≥170 | GB/T3536 |
| Chroma (platinum-cobalt) | <70 | <70 | <70 | ASTM D1209 |
| Molecular weight (number average) | ≥900 | 1200-1375 | Report | ITM32-003 |
| Water content, ppm | trace | trace | trace | GB/T260 |
Product storage and transportation
When storing, loading, unloading and adjusting oil for this product, refer to SH/T0164. The maximum temperature should not exceed 75℃; if stored for a long time, the maximum temperature should not exceed 45℃. This product is non-flammable, non-explosive and non-corrosive. It is the same as ordinary petroleum products in terms of safety, environmental protection and use, and does not require special protection.
Hot Tags: low activity low molecular weight polyisobutylene (pib) 6420, China low activity low molecular weight polyisobutylene (pib) 6420 manufacturers, factory, 4 5 Dimethyl 3 hydroxy 2 5 dihydrofuran 2 one, 2 2 AZOBIS 2 2 IMIDAZOLIN 2 YL PROPANE DIHYDROCHLORIDE, Cyclohexylbenzene, 2 4 Diphenyl 4 methyl 1 pentene, Biurea, EVA Cigarette Adhesive
