video
CAS 25212-86-6丨Furan Resin

CAS 25212-86-6丨Furan Resin

Product Name: Furan Resin (Furfuryl Alcohol Resin)
Synonym: Furfuryl Alcohol Resin, Furan Binder
CAS Number: 25212-86-6
Molecular Formula: (C₅H₆O₂)ₙ
Polymer Type: Thermosetting furan resin

Furfuryl Alcohol Content: ≥65% (casting grade)
Nitrogen Content: ≤3.8% (standard)
Viscosity (20°C): ≤65 mPa·s
Appearance: Amber to dark reddish brown liquid

Packaging: 200kg iron drum / 1000kg IBC
Lead Time: 7–10 business days
MOQ: 25kg sample / 200kg standard
Made in China + COA & SDS: Available

Chat Now
Product Introduction
 

CAS 25212-86-6 | Furan Resin | Foundry Binder & Corrosion-Resistant Resin | China Manufacturer

HIGH TEMP STRENGTH

600°C

Superior hot strength vs PUNB

FURFURYL ALCOHOL

≥65%

High-performance casting grade

ACID & ALKALI

Excellent

Resists most acids and bases

FORM

Liquid

Amber to dark brown

Lead Time: 7–10 business days Origin: Zhengzhou, China Documentation: COA & SDS Shipping: Courier / Air / Sea MOQ: 25kg sample / 200kg standard

Product Overview

Furan resin, CAS 25212-86-6, is a thermosetting resin based on furfuryl alcohol. It is supplied as an amber to dark reddish brown liquid and cured with acid catalysts. Furan resin is one of the most widely used binders in foundry no-bake and self-hardening sand systems.

Unlike commodity resins, furan resin performance is not defined by a single purity value. Furfuryl alcohol content controls reactivity and cured strength. Nitrogen content affects casting defects - low-nitrogen grades are preferred for steel castings. Viscosity controls coating uniformity on sand. Free formaldehyde determines worker safety and environmental compliance.

Primary applications include foundry sand cores and molds, corrosion-resistant linings for chemical equipment, phenolic-furan adhesives, and 3D printed sand molds. Alfa Chemical supplies furan resin from Zhengzhou, China, with batch-specific COA and SDS, and supports both R&D sample orders and bulk production volumes.

Key Properties

Furan resin is selected for four reasons: high-temperature strength, chemical resistance, sand reclamation compatibility, and fast acid-catalyzed curing. Each one maps to a specific casting or anti-corrosion application.

High-Temperature Strength

Furan binders show higher hot strength at 600°C than urethane binders due to carbon precursor generation after decomposition. Suitable for steel, iron and non-ferrous castings.

Acid & Alkali Resistance

Resists most acids, bases and solvents. Long-term service at 120–140°C, short-term up to 180–190°C. Used in corrosion-resistant linings, pipes and valves.

Sand Reclamation

Furan-bonded sand can be thermally reclaimed and reused. Lower acid demand value improves reclamation efficiency and reduces new sand consumption.

Fast Acid-Catalyzed Curing

Cures rapidly with acid catalysts such as p-toluenesulfonic acid or xylene sulfonic acid. Working time adjustable from minutes to over an hour by catalyst selection.

Low Free Formaldehyde Options

Standard grades meet ≤0.3% free formaldehyde. Low-formaldehyde grades ≤0.1% are available for improved worker safety and reduced environmental load.

Good Casting Surface Quality

Produces castings with high dimensional precision and smooth surface finish. Easy shakeout reduces cleaning labor.

Furan Resin vs Other Foundry Binders

Furan resin is not the only foundry binder. The choice depends on casting metal, sand reclamation, and surface quality requirements. The table below compares furan against the two most common alternatives.

Item Furan Resin Phenolic-Urethane (PUNB) Alkaline Phenolic
Hot strength at 600°C Excellent Medium Good
Acid & alkali resistance Excellent Fair Medium
Sand reclamation Good Medium Poor
Curing speed Fast Fast Slow
Free formaldehyde Low grades available Present Low
Relative cost Medium High Medium

Applications

Four application areas. Each one has its own resin loading, catalyst ratio and performance requirement.

Foundry Sand Binder (No-Bake / Self-Hardening)

Used as sand core and mold binder for cast steel, cast iron, ductile iron and non-ferrous metal castings. Produces high-precision castings with smooth surfaces.

Resin loading: 0.8–1.5% based on sand weight
Catalyst ratio: 20–70% based on resin weight
Working time: 12–15 min typical
24h tensile strength: ≥1.5 MPa

Request foundry data →

Corrosion-Resistant Lining & Equipment

Used to prepare anti-corrosion cement for chemical equipment linings, pipes, valves and pump parts. Resists most acids and bases.

Service temp: 120–140°C long-term, 180–190°C short-term
Use: Linings, pipes, valves, pump parts
Form: Liquid resin + powder (for cement/mortar)

Ask about corrosion grades →

Adhesive & Impregnating Agent

Used as adhesive, cleaning agent and cement. Applied in laminated molded plastic products, glass fiber reinforced plastics (FRP) and corrosion-resistant coatings.

Form: Liquid resin
Application: FRP, laminated plastics, coatings
Compatibility: With phenolic and epoxy systems

Request adhesive data →

3D Printing Sand Molds

Used as binder in 3D printed sand molds and cores. Provides high tensile strength and dimensional accuracy for complex casting designs.

Resin loading: ~1.4% based on sand weight
Tensile strength: 2.20 MPa (typical printed mold)
Benefit: Complex geometry, no tooling required

Ask about 3D printing grades →

Product Specifications

Furan resin is a thermosetting polymer system, not a single compound. Key selection parameters are furfuryl alcohol content, nitrogen content, viscosity and free formaldehyde. Values below reflect typical casting-grade release data.

Item Specification
Product Name Furan Resin (Furfuryl Alcohol Resin)
CAS Number 25212-86-6
Molecular Formula (C₅H₆O₂)ₙ
Appearance Amber to dark reddish brown liquid
Density (25°C) 1.2–1.3 g/cm³
Furfuryl Alcohol Content ≥65% (casting grade)
Nitrogen Content ≤3.8% (standard) / ≤2.5% (low-nitrogen)
Viscosity (20°C) ≤65 mPa·s (casting grade)
Free Formaldehyde ≤0.3% (standard) / ≤0.1% (low-formaldehyde)
24h Tensile Strength ≥1.5 MPa
Service Temperature 120–140°C long-term; 180–190°C short-term
Packaging 200kg iron drum / 1000kg IBC
Lead Time 7–10 business days
MOQ 25kg for R&D / 200kg standard
Documents COA, SDS (batch-specific)
Production Zhengzhou, China

COA & SDS

Quality Control

Each production lot from our Zhengzhou facility is released against five tests: appearance, density, viscosity, furfuryl alcohol content and nitrogen content. Retention samples are kept for traceability. Batch-specific COA and SDS ship with every order.

Quality Control for Every Batch

Appearance
Density
Viscosity
Furfuryl Alcohol
Nitrogen Content

Packaging & Shipping

Standard packaging: 200kg iron drum for foundry use and 1000kg IBC for bulk orders. Custom packaging available on request.

Non-hazardous. Shipping by courier, air or sea. Lead time: 7–10 business days. COA and SDS provided with every shipment.

Furan Resin CAS 25212-86-6 sample foil bag packaging Alfa Chemical China Manufacturer

Sample foil bag packaging for R&D and small trial orders.

Furan Resin CAS 25212-86-6 fiber drum packaging Alfa Chemical China Manufacturer

Fiber drum packaging for pilot and medium-volume orders.

Furan Resin CAS 25212-86-6 shipping Alfa Chemical China Manufacturer

Non-hazardous shipping by courier, air or sea. COA and SDS included.

Why Choose Alfa Chemical for Furan Resin

Furan resin supply is not just about price. Furfuryl alcohol content, nitrogen content and viscosity determine whether your castings meet specification. Five points below cover what we supply.

Furfuryl Alcohol ≥65%

High furfuryl alcohol content ensures good reactivity and cured strength. Suitable for demanding steel and iron castings.

Low-Nitrogen Grades Available

≤3.8% standard and ≤2.5% low-nitrogen grades to reduce pinhole and gas porosity defects in steel castings.

Batch-Specific COA & SDS

Every batch tested for appearance, density, viscosity, furfuryl alcohol and nitrogen. COA reports actual values, not typical ranges.

25kg Sample to 1000kg IBC

Start with a 25kg sample for trial casting. Scale to 200kg drums or 1000kg IBC without reformulation.

Zhengzhou China Factory Direct

Direct factory supply with export experience. Shipping by courier, air or sea from Zhengzhou, China.

FAQ

Q1. What is the recommended resin loading for no-bake sand?

Resin loading is typically 0.8–1.5% based on sand weight. Catalyst ratio is 20–70% based on resin weight, adjusted for seasonal temperature. Working time is usually 12–15 minutes.

Q2. What is the difference between low-nitrogen and high-nitrogen furan resin?

Low-nitrogen grades (≤2.5%) reduce casting defects such as pinholes and gas porosity, which is critical for steel castings. Standard grades (≤3.8%) are suitable for non-critical iron castings.

Q3. What is the service temperature limit?

Furan resin can be used long-term at 120–140°C. Short-term exposure up to 180–190°C is possible depending on formulation. In foundry applications, hot strength at 600°C is higher than urethane binders.

Q4. Can furan-bonded sand be reclaimed?

Yes. Furan-bonded sand can be thermally reclaimed and reused. Lower acid demand value of the reclaimed sand improves reclamation efficiency and reduces new sand consumption.

Q5. What packaging and lead time do you offer?

Standard packaging is 200kg iron drum or 1000kg IBC. Lead time is 7–10 business days. Contact us for a confirmed schedule.

Q6. Can you supply COA and SDS?

Yes. Batch-specific COA and SDS ship with every order. COA covers appearance, density, viscosity, furfuryl alcohol content and nitrogen content.

Need Furan Resin for your foundry or corrosion application?

Tell us your casting metal and nitrogen requirement. We reply with a batch COA and shipping quote within 12 hours.

About Alfa Chemical: Based in Zhengzhou, China, Alfa Chemical supplies fine chemicals and specialty intermediates to research and industrial customers worldwide.

Disclaimer: Specifications above are typical release values. Confirm against the batch COA before use. Final performance depends on casting metal, sand type and catalyst selection. For industrial use only. No medical or therapeutic claims are made.

Hot Tags: cas 25212-86-6丨furan resin, China cas 25212-86-6丨furan resin manufacturers, factory, Reactive Red 195, Phenylmethyl silicone oil, EVA Cigarette Adhesive, 3 5 Ditert butylbenzoic acid, Cyclohexylbenzene, Hydrazine 1 2 dicarboxamide

Send Inquiry

whatsapp

Phone

E-mail

Inquiry

Bag