Application and introduction
AC-110DA is suitable for dispersing inorganic pigments, especially titanium dioxide, and can greatly reduce the viscosity of the grinding material. Due to its anionic properties, it is very suitable for acid-catalyzed systems (such as coil coatings). It can reduce haze in electrostatically sprayed coatings containing inorganic pigments.
Technical indicators
Appearance: Colorless to light yellow liquid
Chemical composition: Copolymer solution containing acidic groups
Active ingredient: 50%
Acid value: 5-15 mg KOH/g
Solvent: Xylene and butyl acetate solvent
Characteristic
Greatly reduce system viscosity
De-flocculate pigments and prevent floating and floating
Improve gloss, stabilize color tone, and enhance color intensity
Typical application
Industrial coatings (for epoxy floor coatings)
Automotive coatings
Coil coatings
Anti-corrosion coatings
Recommended Usage
It has wide applicability. The amount added varies according to different usage systems. The amount added to inorganic pigments is 2%-10%, and the amount added to titanium dioxide is 2%-4% (depending on the specific surface area of the pigment).
Add the dispersing agent to the base material and stir well, then add pigments and fillers for dispersion. It is suitable for any dispersion method such as sand milling, roller milling, ball milling, etc.
Package and transportation
Package:25kg/100kg
Transportation: by courier/ by air/ by sea
Hot Tags: wetting and dispersing additives ac-110da=disperbyk-110, China wetting and dispersing additives ac-110da=disperbyk-110 manufacturers, factory, Material Chemicals
