Product Features
The products mainly comply with the JC907-2002 "Concrete Interface Treatment Agent" standard, and all performance indicators meet or exceed the requirements of this standard.
Instructions for use
Add water to the powder on site and stir evenly for use directly. The specific water adding ratio is 0.25~0.3kg of water per kg of dry material. Before using this interface agent, the floating layer and other debris on the surface to be treated should be cleaned, and the surface to be treated can be moistened with water; The water agent is a two-component liquid interface agent. When using it, mix the two components according to the volume ratio of 1:1. Stir evenly before use. Before use, the floating layer and other debris on the surface to be treated should be cleaned. If rinsed with water , the interface agent should be used after the surface is dry. Subsequent construction should be carried out after the interface agent is in a semi-dry state.
Packaging and storage
Powders are packed in double-layer plastic inner and outer woven bags, each bag is 25kg. Liquids are packed in iron drums or plastic drums. Packaging specifications can be determined according to customer requirements.
Precautions
The operating temperature of this interface agent is 10~35℃. If it is used outside this temperature range, please consult our company's technical department.
The powder should be used within 2 hours after adding water, and the water should be used within 3 hours after mixing the two combinations.
Hot Tags: td-9 interface agent, China td-9 interface agent manufacturers, factory, Isosorbide Dimethyl Ether, Alpha Methyls Styrene Dimer, Benzalkonium Chloride, Tolyltriazole, 3 5 Ditert butylbenzoic acid, EVA Cigarette Adhesive
