HC-4518 High Quality Polyester Staple Fiber Unified Oil Agent

HC-4518 High Quality Polyester Staple Fiber Unified Oil Agent

When using polyester staple fiber oil, we hope to create a more powerful and comprehensive comprehensive performance based on the elements such as bundling, fluffiness, antistatic and hydrophilicity expected by customers in the three-dimensional/two-dimensional polyester staple fiber production process. Oil products suitable for polyester staple fiber applications. In the end, we optimized and upgraded the oil formula design, and based on this we produced an oil agent for polyester short fiber with excellent performance.

Product Introduction

Features


 

① High content ratio, saving costs

②The fibers have good bundling properties and softness before spinning, and are easy to draft after spinning.

③Usage: 0.5-1.5 kg/ton of fiber for front spinning, 3-4 kg/ton of fiber for post-spinning

④ Low foaming, less foaming, no peculiar smell, no caking or putrefactive substances

 

Physical and chemical indicators


 

Appearance Light yellow to yellowish brown liquid
Solid content 40%±2 / 45%±2
PH value 7~9
Ionic type non-ionic/cationic
Water solubility easily soluble in water

 

Application process


 

Usage: Adjust the oil concentration according to the production equipment, process conditions and target OPU.

Silicone-free fiber: The target OPU is 0.15-0.25% at 4de and below, and 0.25-0.4% above 4de. Pre-spinning of silicone fiber: use concentration 0.3-1%; it is recommended not to add direct water or add a small amount of silicone oil after spinning.

 

Precautions


 

1) Water quality requirements: conductivity below 10us/cm, hardness below 3mg/L (as CaCO3), pH between 6.0-8.0.

2) This oil is used for three-dimensional fiber production. Before using this oil for other purposes, please test the suitability before use.

3) All chemicals may have adverse effects on the environment and human body. Please refer to the International Chemical Safety Instructions for details.

4) This oil will become turbid or frozen below 0°C. Before use, warm it to 20-30°C to completely dissolve it before use. It will not affect the quality.

5) This product has a shelf life of 6 months. Avoid direct sunlight and transport it safely.

 

 

 

 

If quality problems occur, we will provide a full refund and bear all shipping costs. Send an inquiry now to get at least 10% off, please contact us via WhatsApp or Email us to discuss.

Hot Tags: hc-4518 high quality polyester staple fiber unified oil agent, China hc-4518 high quality polyester staple fiber unified oil agent manufacturers, factory, Reactive Red 195, EVA Cigarette Adhesive, 1 3 Propanediol, Benzalkonium Chloride, Tolyltriazole, M DIISOPROPENYL BENZENE

Send Inquiry

whatsapp

Phone

E-mail

Inquiry

Bag