CAS 68611-50-7 | Liquid Polysulfide Polymer | Thioplast® G Series Equivalent | China Manufacturer
MW RANGE
1,000–4,600
g/mol across four grades
THIOL CONTENT
1.5–7.7%
Grade-dependent
VISCOSITY (25°C)
0.94–48 Pa·s
Low to high viscosity grades
STOCK GRADES
4 Grades
AL-2 / AL-23 / AL-32 / AL-3
KEY APPLICATIONS
Jump to application data:
Product Overview
Liquid Polysulfide Polymer (CAS 68611-50-7) is a family of thiol-terminated liquid polysulfide rubbers. Alfa Chemical supplies four grades - AL-2, AL-23, AL-32 and AL-3 - covering a molecular weight range of 1,000 to 4,600 g/mol. All grades share the same mercaptan (-SH) end groups and cure with MnO₂ or epoxy resins.
AL-3 (MW ~1,000) gives high crosslink density and fast cure, often used for epoxy modification. AL-23 (MW ~2,500) is a balanced mid-range grade for general sealants. AL-2 (MW 3,500–4,600, typical ~4,000) is the standard grade for insulating glass. AL-32 (MW ~4,000, 0.5 mol% TCP) delivers the highest elongation for large-movement joints. Thioplast® is a registered trademark of Nouryon.
Primary applications include insulating glass secondary seals, high-performance sealants, marine and pipeline sealing, road repair and epoxy-modified anti-corrosion coatings. Alfa Chemical supplies these grades from Zhengzhou, China, with batch-specific COA and SDS. Packaging ranges from 1kg R&D bottles to 1000kg IBC. Lead time is 7–10 business days for stock grades. Learn more about our industrial chemicals portfolio.
Grade Selection Guide
Alfa Chemical stocks four liquid polysulfide grades. All four share the same CAS number 68611-50-7. They differ in molecular weight and branching level, which determine viscosity and cured properties.
Note: The following data references public industry specifications for comparison only. Alfa batch-specific values are reported in the COA. Confirm with us before formulation.
| Item | AL-3 | AL-23 | AL-2 | AL-32 |
|---|---|---|---|---|
| Average MW (g/mol) | ~1,000 | ~2,500 | 3,500–4,600 | ~4,000 |
| Third functional group (mol%) | 2.0 | 2.0 | 2.0 | 0.5 |
| Viscosity (Pa·s, 25°C) | 0.94–1.44 | 10–14 | 41–48 | 41–48 |
| Crosslink density after cure | High | Medium | Medium | Low |
| Typical use | Epoxy modification, fast-cure sealant, casting | General sealant, balanced performance | Insulating glass, marine & pipeline sealant | High-elongation sealant, large-movement joints |
Need a grade not listed here, such as AL-12, AL-31 or a custom molecular weight? Contact us for made-to-order options.
Key Properties
These grades are selected for six reasons: reactive thiol end groups, elasticity and elongation, chemical resistance, weatherability, low permeability, and epoxy compatibility. Each one maps to a specific sealant or coating application.
Reactive Thiol End Groups
Mercaptan (-SH) end groups react with MnO₂, PbO₂, or epoxy resins at room temperature. Curing can be accelerated with small amounts of diphenylguanidine or similar accelerators. Working time can be adjusted by catalyst level and temperature.
Elasticity & Elongation
Cured systems show high elongation at break and good elastic recovery. Suitable for dynamic joints and vibration-prone assemblies such as vehicle bodies and industrial equipment. AL-32 provides even higher elongation at lower crosslink density.
Chemical Resistance
Resists ozone, oils, fuels, acids, alkalis, and many industrial chemicals. This makes it a standard choice for fuel-resistant sealants and chemical plant pipe seals.
Weatherability & Heat Aging
Resists moisture and heat aging. Construction-grade sealants can withstand decades of outdoor exposure. Cured sealant service temperature depends on the formulation.
Low Permeability
Low moisture vapor and gas permeability make these sealants ideal for insulating glass secondary seals, where moisture retention and gas fill retention are critical.
Epoxy Compatibility
Reacts with epoxy resins to improve flexibility and impact resistance without sacrificing adhesion. Used in epoxy-modified anti-corrosion coatings and adhesives. AL-3 is often selected when higher crosslink density and faster cure are needed.
Structure & Crosslink Density
up: difunctional linear backbone. Down: trifunctional branching point from 2 mol% TCP.
Difunctional vs Trifunctional
The polymer backbone is built from difunctional units that form linear chains. Trifunctional branching points, introduced by 1,2,3-trichloropropane (TCP), create crosslinks between chains. The TCP content (mol%) controls the crosslink density after curing.
AL-2, AL-23 and AL-3 contain 2.0 mol% TCP, giving medium crosslink density, good elasticity and moderate elongation.
AL-32 contains only 0.5 mol% TCP. With the same molecular weight as AL-2 but far fewer crosslinks, it delivers the highest elongation for large-movement joints.
Applications
These liquid polysulfide grades are used across five major application areas. Each one has its own formulation ratio, curing condition and performance requirement.
Applications: insulating glass, marine and pipeline sealing, epoxy modification and road pavement.
Insulating Glass Secondary Seal
These grades provide the secondary seal in double-glazed units. Low moisture vapor transmission rate and good adhesion to glass and spacer materials.
Standard: ASTM C-1135
Tensile bond: ≥60 psi
Service life: 20+ years in sealed units
High-Performance Sealant Base
Used as the base polymer for high-performance sealants requiring fuel and chemical resistance. Cured sealant maintains elasticity over a wide temperature range depending on the formulation.
Formulation: 100 parts + MnO₂ 6–15 parts
Working time: 30 min to 2 hours at 25°C
Typical use: Industrial sealants, fuel-resistant joints
Marine & Pipeline Sealing
Used in ship deck sealing, pipeline joint protection, and industrial repair compounds. Withstands UV, ozone and temperature cycling for decades.
Formulation: + plasticizer + filler + MnO₂
Plasticizer: 30–37 parts per 100 parts
Application: Ship deck, pipeline joints
Epoxy Modified Anti-Corrosion Coating
AL-2 and AL-3 react with epoxy resins to improve flexibility and impact resistance without sacrificing adhesion. Used in heavy-duty anti-corrosion coatings.
Epoxy modification: 10–30 parts per 100 parts epoxy
Benefit: Improved flexibility and impact resistance
Use: Ship hull, steel structure, concrete
Road Pavement & Joint Sealant
AL-2 and AL-32 based sealants are used in highway pavement joints, bridge decks and airport runways. Flexible at low temperature and resistant to fuel and oil.
Formulation: AL-2/AL-32 + plasticizer + filler + MnO₂
Standard: ASTM D-3406, Fed. Spec. SS-S-200
Application: Highway, bridge, runway
Comparison with Thioplast® G Series
AL-2 is a performance equivalent to Thioplast® G1 from Nouryon. Both grades share 2.0 mol% TCP branching and overlapping viscosity and molecular weight ranges. AL-23 is comparable to Thioplast® G21, and AL-32 is a performance equivalent to Thioplast® G112 (same MW, same 0.5 mol% TCP).
The first table below compares AL-2 directly against Thioplast® G1. The second table covers the full Alfa grade range for internal selection.
Reference data from public industry specifications. Alfa batch-specific values are reported in the COA. Confirm with us before formulation.
Table 1. AL-2 vs Thioplast® G1
| Item | AL-2 (Alfa) | Thioplast® G1 |
|---|---|---|
| MW (g/mol) | 3,500–4,600 | 3,400–4,600 |
| Thiol content (%) | 1.7–2.0 | 1.8–2.0 |
| Viscosity (Pa·s, 25°C) | 41–48 | 38–50 |
| Third functional group (mol%) | 2.0 | 2.0 |
| Water content (%) | ≤0.3 | ≤0.3 |
| Main use | Insulating glass, industrial sealants | Aerospace, insulating glass |
Table 2. Full Alfa Grade Range vs Thioplast® G Series
| Item | AL-3 (≈ G44) | AL-23 (≈ G21) | AL-2 (≈ G1) | AL-32 (≈ G112) |
|---|---|---|---|---|
| Average MW (g/mol) | ~1,000 | ~2,500 | 3,500–4,600 | ~4,000 |
| Thiol content (%) | 5.9–7.7 | 2.5–3.1 | 1.7–2.0 | 1.5–2.0 |
| Viscosity (Pa·s, 25°C) | 0.94–1.44 | 10–14 | 41–48 | 41–48 |
| Third functional group (mol%) | 2.0 | 2.0 | 2.0 | 0.5 |
| Crosslink density after cure | High | Medium | Medium | Low |
| Typical use | Epoxy modification, fast-cure sealant, casting | General sealant, balanced performance | Insulating glass, marine & pipeline sealant | High-elongation sealant, large-movement joints |
"≈" indicates comparable or performance-equivalent grades based on public specifications. AL-23 thiol range references Thioplast® G21 data; AL-3 vs G44 requires batch COA confirmation. Thioplast® is a registered trademark of Nouryon. Alfa Chemical is not affiliated with Nouryon.
Product Specifications
| Item | Specification |
|---|---|
| Product Name | Liquid Polysulfide Polymer |
| Synonym | Polysulfide Rubber, Thioplast® G Series Equivalent |
| CAS Number | 68611-50-7 |
| Appearance | Brown viscous liquid |
| Molecular Weight | 1,000–4,600 g/mol |
| Thiol Content (-SH) | 1.5–7.7% |
| Viscosity (25°C) | 0.94–48 Pa·s |
| Third Functional Group | 0.5–2.0 mol% TCP |
| Water Content | ≤0.3% |
| End Group | Mercaptan (-SH) |
| Cured Sealant Service Temperature | -54°C to +121°C (aerospace formulations) |
| Storage | 5–30°C, sealed, away from sunlight |
| Shelf Life | 3 years under proper storage |
| Packaging | 1kg to 1000kg IBC (full range) |
| Documents | COA, SDS (batch-specific) |
| Production | Zhengzhou, China |
Range reflects the full AL grade family. Individual grades have narrower specifications - see Grade Selection Guide. Batch-specific COA reports actual values for each lot. Contact us for the current batch specification before formulation.
COA & SDS
Every shipment includes batch-specific COA & SDS
COA reports actual values for appearance, molecular weight, thiol content, viscosity and water content. SDS follows GHS format. Available for all stock grades.
Quality Control
Each batch is released against five tests: appearance, molecular weight, thiol content, viscosity and water content. Retention samples are kept for traceability. Batch-specific COA and SDS ship with every order from our Zhengzhou facility.
Quality Control for Every Batch
Packaging & Shipping
Same batch quality from 1kg R&D bottle to 1000kg IBC.
Stock grades ready for courier, air or sea freight from Zhengzhou.
Full-Range Packaging
R&D scale: 1kg bottle / 10kg pail
Pilot scale: 25kg pail / 50kg drum
Industrial scale: 190kg iron drum / 1000kg IBC
Custom packaging available on request. Non-hazardous. Store sealed at 5–30°C, away from sunlight.
Stock & Lead Time
Stock grades: AL-2 / AL-23 / AL-32 / AL-3 - 7–10 business days
Other grades: made to order, lead time on request
Shipping by courier, air or sea from Zhengzhou, China. COA and SDS provided with every shipment. Contact our Zhengzhou team for custom logistics.
Why Choose Alfa Chemical
Polysulfide supply is not just about cost. Molecular weight and crosslink density determine whether your sealant cures properly and performs as designed. Five points below cover what we supply.
Four Stock Grades, One Source
AL-2, AL-23, AL-32 and AL-3 in stock. Match molecular weight and crosslink density to your application without splitting orders across suppliers.
Batch-Specific COA & SDS
Every batch tested for appearance, molecular weight, thiol content, viscosity and water content. COA reports actual values, not typical ranges.
Grade Selection Support
Tell us your target elongation, hardness or cure speed. We help match AL-2, AL-23, AL-32 or AL-3 to your formulation and provide MnO₂ curing ratios and plasticizer recommendations.
Full Packaging Range
From 1kg R&D bottles to 1000kg IBC for industrial production. Same batch quality across all pack sizes.
Zhengzhou China Factory Direct
Direct factory supply with export experience. Shipping by courier, air or sea from Zhengzhou, China.
FAQ
Q1. Which grade should I choose: AL-2, AL-23, AL-32 or AL-3?
It depends on the crosslink density and cured properties you need. AL-3 (MW ~1,000) gives high crosslink density and fast cure, often used for epoxy modification. AL-23 (MW ~2,500) is a balanced mid-range grade for general sealants. AL-2 (MW 3,500–4,600) gives high elongation with 2 mol% branching, standard for insulating glass. AL-32 has the same molecular weight as AL-2 but only 0.5 mol% branching, giving the highest elongation for large-movement joints. See the Grade Selection Guide above.
Q2. Do all grades have the same CAS number?
Yes. All four grades share CAS 68611-50-7, which covers the liquid polysulfide polymer family. They differ in molecular weight and branching level, not in CAS registration.
Q3. Which grades are in stock and what is the lead time?
AL-2, AL-23, AL-32 and AL-3 are stock grades with 7–10 business days lead time. Other grades such as AL-12 and AL-31 are made to order; lead time on request.
Q4. What is the recommended MnO₂ ratio for these polysulfide grades?
Typically 6–15 parts MnO₂ per 100 parts polymer, with 6 parts being the most common for high-performance sealants. Higher MnO₂ gives faster cure but shorter working time. We recommend 6 parts for a 30-minute to 2-hour working window at 25°C.
Q5. What is the MOQ and what packaging sizes do you offer?
MOQ is 1kg for R&D samples and 190kg for bulk orders. Packaging: 1kg bottle, 10kg/25kg/50kg pail, 190kg drum, 1000kg IBC. Custom packaging available.
Q6. How do you ensure batch consistency and what documentation do you provide?
Each batch is tested for appearance, molecular weight, thiol content, viscosity and water content. Retention samples are kept for traceability. COA reports actual values, not typical ranges. SDS follows GHS format. Both ship with every order.
Need a specific polysulfide grade?
Tell us your target MW, crosslink density or application. We reply with a batch COA and shipping quote within 12 hours.
EXPLORE MORE
More Industrial Chemicals
About Alfa Chemical: Based in Zhengzhou, China, Alfa Chemical supplies fine chemicals and specialty intermediates to research and industrial customers worldwide.
Disclaimer: Grade Selection Guide data references public industry specifications for comparison only; Alfa batch-specific values are reported in the COA. Thioplast® G1 comparison data references Nouryon PDS. AL-23 thiol range references Thioplast® G21 data. AL-3 vs G44 requires batch COA confirmation. Specifications above are typical release values. Confirm against the batch COA before use. Final sealant performance depends on formulation, curing agent and application conditions. For industrial use only. No medical or therapeutic claims are made.
Thioplast® is a registered trademark of Nouryon. Alfa Chemical is not affiliated with Nouryon.
Hot Tags: CAS 68611-50-7 | Liquid Polysulfide Polymer | Polysulfide Rubber | Alfa Chemical, China CAS 68611-50-7 | Liquid Polysulfide Polymer | Polysulfide Rubber | Alfa Chemical manufacturers, factory, Diphenylsiloxane dimethylsiloxane copolymer, Alpha Methyls Styrene Dimer, EVA Cigarette Adhesive, 1 3 Diisopropenylbenzene, Cyclohexylbenzene, Biurea














